If you have been reading about “the new AC refrigerant rules,” you may be wondering whether your air conditioner is about to become obsolete. It is not. But the refrigerant used in most Canoga Park homes, R-410A, is being replaced in new equipment, and that change affects what you buy, what repairs cost and which contractors are qualified to work on your system. Here is a plain-English guide to what changed, what did not, and what to do about it.
Cooling By Design is headquartered at 21201 Victory Blvd, Suite 125, Canoga Park, CA 91303. Licensed (#1148982), a certified Mitsubishi Electric Diamond Dealer, with 24-hour emergency service available. Call (877) 702-6654 if you are not sure which refrigerant your system uses or whether it affects your next repair.
What Is Actually Changing
Under federal rules aimed at cutting the global warming impact of hydrofluorocarbon (HFC) refrigerants, new residential and light commercial air conditioning equipment manufactured since January 2025 is moving away from R-410A. R-410A has a global warming potential (GWP) of about 2,088. The replacements are much lower: R-454B is about 466 and R-32 is about 675.
The key points for homeowners:
- R-454B is the main replacement in ducted central systems from major manufacturers.
- R-32 is widely used in ductless and mini-split equipment.
- There is no drop-in substitute. New refrigerants require equipment designed for them, so you cannot simply swap one into an older system.
What Is NOT Changing: Your Existing System Is Fine
Nothing in these rules requires you to replace a working R-410A air conditioner. R-410A remains available for servicing existing equipment, even though overall production is being reduced over time. Industry observers expect it to become more expensive as supply tightens, but that is a gradual shift, not a deadline.
If your system uses the older R-22 refrigerant, which was phased out for new production in 2020, your situation is different. That refrigerant is far scarcer and costlier, and an R-22 system with a leak is often a replacement candidate. Our guide to how to tell if your AC needs a refrigerant recharge explains the signs and what a proper fix involves.
How to Find Out What Your System Uses
Look at the data plate on the outdoor unit. It lists the refrigerant type (such as R-22, R-410A, R-454B or R-32), the factory charge and the model and serial numbers. If you cannot read it, a technician can identify it during a service visit. Knowing this up front helps you avoid surprises when a repair or replacement comes up.
What the New Refrigerants Mean for Your Next Purchase
A2L refrigerants and safety
R-454B and R-32 are classified as A2L refrigerants, meaning they are mildly flammable, with low burning velocity and a high ignition threshold. They are designed to be used safely in homes, with equipment and installation practices built around them. What matters is hiring a technician who has been trained to handle them properly.
Matched systems
Because new equipment is engineered for the newer refrigerants, an outdoor unit and indoor coil generally need to be installed as a matched set. In practice, replacing only the outdoor unit on an older R-410A system may not be an option, so a full system replacement is more common. Ask your contractor to explain exactly what is included.
Cost and availability
Newer equipment can cost more upfront while the industry transitions. Rebates can offset some of that. If you are weighing a replacement, see our guide to LADWP and California HVAC rebates in 2026. Rebate paperwork requires an AHRI certificate that matches your installed equipment, so the right refrigerant and model documentation matter.
Heat pumps use the new refrigerants too
Modern heat pumps and ductless systems are part of this transition. If you are comparing system types, our guide to heat pumps versus AC plus a furnace and our overview of ductless mini splits cover the tradeoffs.
Questions to Ask Any Contractor
- Which refrigerant does the proposed system use, and is the outdoor unit and indoor coil a matched set?
- Are your technicians EPA-certified and trained to work with A2L refrigerants?
- If my current system leaks, will you find and repair the leak instead of just topping it off?
- Will you pull the permit and provide the model and AHRI documentation needed for rebates?
- What does the warranty cover, and what does it require from me?
Our guides on repairing versus replacing your AC and the average lifespan of an AC unit in Canoga Park can help you decide whether it is time. Keep an older system running longer with a professional tune-up and our maintenance plans. If you do replace, ask about our 10-year installation protection offer and financing options. If your heating system is the one giving you trouble right now, start with our 7 checks for a furnace that will not turn on.
Our Service Area
Cooling By Design repairs and replaces cooling systems, including newer-refrigerant equipment, from our Canoga Park headquarters across:
- Canoga Park
- Winnetka
- Woodland Hills
- West Hills
- Tarzana
- Reseda
- Chatsworth
- Northridge
- Hidden Hills
- Bell Canyon
- Calabasas
- Lake Balboa
- Porter Ranch
- Encino
- North Hills
- Granada Hills
- Topanga
- Van Nuys
- Panorama City
- Mission Hills
- Sherman Oaks
Frequently Asked Questions
Is R-410A being banned?
New residential equipment is moving away from R-410A, but servicing existing R-410A systems is still allowed. You do not have to replace a working system.
What are R-454B and R-32?
They are the lower-global-warming-potential refrigerants replacing R-410A in new equipment. R-454B is common in ducted central systems, and R-32 is widely used in ductless systems.
Can I put R-454B or R-32 in my old R-410A system?
No. There is no drop-in replacement. Equipment must be designed for the specific refrigerant it uses.
Is the new refrigerant safe in my home?
R-454B and R-32 are classified as mildly flammable (A2L), but they are designed and installed with safety measures in mind. Use a licensed, properly trained technician.
Will my R-410A repair costs go up?
Over time, possibly, as production is reduced. This is a gradual change, so a healthy system can keep running with regular maintenance.
How do I know what refrigerant my AC uses?
Check the data plate on the outdoor unit, or ask a technician during your next service visit.
Not Sure What Your System Uses?
We can identify your refrigerant, explain what it means for your next repair, and walk you through your options without pressure. Browse our frequently asked questions for more. Call (877) 702-6654 or schedule online here. Email office@coolingbydesign.com. License #1148982. 21201 Victory Blvd, Suite 125, Canoga Park, CA 91303.
